- Event feed shows event_type + area_desc instead of timestamp headline
- First sentence of description shown as hazard summary
- Local events (matching NWS zones) pinned to top with highlight
- Nearby events grouped below, slightly dimmed
- Dedup by event_id
Merged remote changes with local notification verification system:
- Kept local: channels.py, router.py, notification_routes.py, Notifications.tsx
(contains the new end-to-end verification system)
- Accepted remote: Config, Environment, Reference pages, new commands,
categories, summarizer, and other supporting files
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Channel connectivity test: SMTP, webhook, mesh with real errors
- Rule test shows live data from feeds, not canned examples
- Near-miss detection: shows events filtered by threshold
- Three send actions: current conditions, example alert, live alert
- Rule status indicators: last fired, data source health
- All errors show actual error messages
- Disabled feed detection with clear warnings
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Test always shows current data for the rule's feed categories
- RF rules show live SFI/Kp/R/S/G and ducting conditions
- Weather rules show active NWS alert count and headlines
- Fire rules show active fire/hotspot count
- Stream rules show current gauge readings
- Mesh rules show current health score and infra status
- Send Current Conditions delivers live snapshot through channel
- Send Test Alert delivers example through channel
- Send Live Alert available when real conditions match
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Tests check current conditions against rule categories/severity
- Shows actual alert messages that would fire right now
- Falls back to example messages from category registry if no matches
- Preview mode shows without sending, Send Test delivers with [TEST] prefix
- Mesh delivery applies real summarization so preview matches actual output
- Added test dialog UI showing conditions matched and preview messages
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Utilization pillar now reads firmware-reported channel_utilization
instead of estimating from packet counts with hardcoded 200ms/pkt
- Uses highest infra node value (busiest node = bottleneck)
- Falls back to packet count estimate only when telemetry unavailable
- Updated thresholds: 20/25/35/45% matching real Meshtastic behavior
- Per-region utilization from region nodes, not mesh-wide
- API response includes util_method, util_max_percent, util_node_count
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Reference page now explains HOW each health pillar is calculated:
- Infrastructure: router online ratio
- Utilization: airtime estimation from packet counts
- Coverage: gateway redundancy with single-gw penalties
- Behavior: flagged node thresholds
- Power: battery warning ratio
Includes actual formulas and special cases.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Replace fixed overlay with useRef-based click-outside detection
- Add X close button in top-right corner of popover
- Click ? to toggle (open if closed, close if open)
- Click anywhere outside popover to dismiss
- Remove fixed inset-0 overlay that was blocking page interaction
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add helper text and info (?) buttons to every field in Config.tsx
- Add section descriptions at the top of each config section
- Battery thresholds now show voltage equivalents (e.g., "30% ≈ 3.60V")
- NWS severity dropdown shows descriptions per option
- Alert rules grouped by category with full explanations
- Add InfoButton popover component for detailed field documentation
- Add info buttons to Environment.tsx RF propagation panels
- VOLTAGE_MAP and getVoltageApprox helper for Li-ion voltage lookup
Researched defaults and descriptions include:
- Li-ion voltage curve (4.20V=100%, 3.60V=30%, 3.50V=15%, 3.40V=7%)
- LoRa channel utilization (firmware throttles at 25%, issues at 50%)
- Packet flood detection (normal 1-5/min, suspicious >10/min)
- NWS severity levels with actionable descriptions
- Tropospheric ducting M-units/km refractivity gradients
- NOAA Space Weather R/S/G scales
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- SFI/Kp as prominent color-coded values with trend chart
- R/S/G scales as colored severity badges
- Tropospheric ducting condition with refractivity profile
- Environmental feeds replaced with scrolling live event timeline
- Unified activity log across all 9 feed adapters
- Source icons, severity badges, chronological order
- Real-time updates via WebSocket
- SWPC adapter stores Kp/SFI history for charting
- No wasted card space
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Self-contained rules replace abstract channels
- Inline delivery config (broadcast/DM/email/webhook or none)
- quiet_hours_enabled master toggle separate from start/end times
- delivery_type="" valid: rule matches but does not deliver
- Severity dropdown with plain-English descriptions
- Example messages per alert category
- Default baseline rules: Emergency Broadcast, Infrastructure Down, Fire Alert, Severe Weather
- Condition vs Schedule trigger types
- Test and preview buttons per rule
- stream_flood_warning renamed from flood_warning (distinct from packet_flood)
- Categories display with descriptions
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Each notification rule contains its own delivery config inline
- No more separate channels with abstract IDs to cross-reference
- Delivery type selector (Mesh Broadcast/DM/Email/Webhook) with
inline config fields per type
- Follows MeshMonitor trigger-action UX pattern
- Channel picker from radio for mesh broadcast
- Node picker for mesh DM
- Collapsed rule cards show readable one-line summary
- Trigger type: condition (alerts) or schedule (daily reports)
- Schedule triggers support daily, weekly, custom cron
- Message types: mesh health, RF propagation, alerts digest, custom
- Migrates old channels+rules config to new flat format on load
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add GET /api/channels endpoint for live radio channel data
- Create ChannelPicker component (single/multi-select from live channels)
- Create NodePicker component (searchable multi-select from mesh nodes)
- Replace manual inputs in Config with data-driven pickers
- Update Notifications to use pickers for mesh broadcast/DM
- Resolve node names in Alerts subscriptions display
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Create standalone Notifications.tsx page with full notification config UI
- Add /notifications route in App.tsx
- Add Notifications nav item in Layout.tsx sidebar (below Alerts, BellRing icon)
- Remove notifications section from Config.tsx (keep settings sections only)
- Channels, rules, quiet hours, and dedup all configurable on dedicated page
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Notifications tab in Config sidebar with Bell icon
- Channels section: add/edit/delete channels (mesh broadcast, DM, email, webhook)
- Test button sends test alert to channel
- Rules section: create rules with category checkboxes fetched from API
- Quiet hours configurable with start/end times
- Dedup window to prevent alert spam
- Full helper text and info buttons on every field
- Category list fetched from /api/notifications/categories, not hardcoded
- Added notifications and environmental to VALID_SECTIONS in config_routes.py
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add InfoButton component with click-to-toggle popover for field help
- Add SectionDescription component for section intro paragraphs
- Add AlertRuleToggle component with grouped threshold controls
- Add detailed info and helper text for every field in all sections
- Convert Commands section to toggleable command list with descriptions
- Add dropdowns for severity_min, fire state, connection type, LLM backend
- Add region management: Add/Delete buttons with confirmation
- Group alert rules by category: Infrastructure, Power, Utilization, Health
- Remove hardcoded placeholders and Idaho-specific text
- Fix config.py DashboardConfig dataclass decorator
- Fix main.py MessageRouter initialization
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Full Alerts page with active alerts, history table, subscriptions
- Active alert cards with severity styling and acknowledge button
- Alert history table with type/severity filtering and pagination
- Subscription viewer showing mesh subscriptions
- ToastProvider for app-wide toast notifications
- Toast notifications triggered on WebSocket alert_fired messages
- Auto-dismiss toasts after 8 seconds, click to navigate
- Page titles on all pages (Dashboard/Mesh/Environment/Config/Alerts)
- Improved alert_routes.py with proper pending alert handling
- Added AlertHistoryItem, Subscription types to api.ts
- Added fetchAlertHistory, fetchSubscriptions functions
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Implement FIRMSAdapter polling NASA FIRMS area API for satellite hotspots
- Cross-reference hotspots against NIFC perimeters to identify new ignitions
- Add !hotspots command with --new flag for filtering new ignitions only
- Add FIRMSConfig dataclass with map_key, source, bbox, day_range options
- Add /api/env/hotspots endpoint for dashboard integration
- Add Satellite Hotspots section to Environment.tsx with NEW badges
- Add FIRMS configuration section to Config.tsx with source/confidence options
- Update config.example.yaml with FIRMS configuration template
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- WFIGS ArcGIS fire perimeter polling with proximity alerts
- Avalanche.org advisory polling (seasonal, SNFAC)
- !fire and !avy commands
- Distance-based severity for fires near mesh infrastructure
- Dashboard environment page integration
- Alert engine fires on fires within 50km of mesh area
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Remove band_assessment and band_detail from SWPC adapter
- Remove all frequency-specific conclusions (906 MHz, 10m-20m, etc.)
- Store only raw indices: SFI, Kp, R/S/G scales, dM/dz gradients
- Let LLM interpret propagation data based on user's band of interest
- Add full Environment page with feed status, solar indices, and ducting data
- Update Dashboard RF Propagation card to show raw values only
- Update alert messages to be frequency-agnostic
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Tabbed config editor covering all 15 config sections
- Mesh sources: card-based list with add/edit/delete
- Mesh intelligence: region editor, critical nodes, alert rules
- Environmental feeds: per-feed toggle and config cards
- Save with validation, restart-required detection, discard changes
- Form components: text, number, toggle, select, textarea, list inputs
- Password fields with show/hide toggle
- Conditional field visibility based on enable toggles
- Replaces the 1434-line TUI configurator for daily use
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Added blur config for dimmed state (opacity 0.15 for nodes, 0.04 for edges)
- Added scale effect on node hover (1.1x)
- Explicit edgeSymbol: none to disable edge markers
- Only nodes are interactive: hover, click, tooltip
- Edges have no hover effect, no tooltip, no click handler
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Replaced React state-driven animation with ECharts graph rendering.
Previous approach re-rendered 263+ SVG nodes via setState in rAF loop,
causing browser lockup. New approach uses ECharts which handles force
layout and rendering natively at scale.
Changes:
- Switch from D3 force sim + React state to ECharts graph
- Remove particle animation (was fake random noise, not real packets)
- Filter out nodes with zero edges by default
- Add filter controls: Connected, Infra, All
- ECharts handles zoom/pan/drag natively (roam: true)
- Node selection dims unrelated nodes
- Force config matches Meshview: repulsion 200, edgeLength [80,120]
- Animation disabled for performance (animation: false)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Dynamic force parameters based on node/edge count and density
- Per-node degree-weighted link strength for balanced layouts
- Position clamping keeps nodes within viewport
- d3-zoom for pan/zoom (wheel, drag, double-click reset)
- Zoom control buttons (+, -, reset) in corner
- Drag handlers account for zoom transform
- Legends stay fixed outside transform group
- Scales gracefully from 63 to 200+ nodes
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Prevents "e.pillars is undefined" crash when health object
doesn't have pillars property (e.g., during initial load or
if API response is malformed).
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Vite + React 18 + TypeScript + Tailwind CSS
- Dashboard overview with health gauge, pillar bars, alerts
- WebSocket hook for real-time updates
- Layout with sidebar navigation and live indicator
- Placeholder pages for Mesh, Environment, Config, Alerts
- Dark theme ops center aesthetic with JetBrains Mono
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
