Per-family notification policy (PagerDuty/Grafana-style): each family gets a
severity threshold + region scope + a severity->channel routing matrix, so an
operator opts in per family rather than hand-writing rules.
SECTION 1 -- BACKEND
- config.py: new NotificationToggle dataclass (enabled, min_severity, regions,
severity_channels{severity->[channel types]}, quiet_hours_override, + per-channel
delivery config: broadcast_channel/node_ids/smtp_*/recipients/webhook_*).
notifications.toggles is now a dict[family]->NotificationToggle with 8 family
defaults (mesh_health, weather, fire, rf_propagation, roads, avalanche, seismic,
tracking), all enabled=false (opt-in), min_severity=priority,
severity_channels={priority:[mesh_broadcast], immediate:[mesh_broadcast, mesh_dm]},
quiet_hours_override=true. (Old TogglesConfig.enabled was only read by
build_pipeline via getattr -> degrades to ToggleFilter no-op, so the pipeline
filter is unchanged; toggles now drive the Dispatcher instead.)
- region_scope:list added to NotificationRuleConfig; _matching_rules filters by
event.region/regions ([] = all).
- Dispatcher: _dispatch_toggles runs IN PARALLEL to rule matching -- looks up
get_toggle(event.category), checks enabled + region scope + severity threshold,
then for each channel in severity_channels[event.severity] builds a synthetic
rule (override_quiet set only for immediate when quiet_hours_override) and
delivers. 'digest' channel is skipped in live dispatch (handled by accumulator).
- categories.py: get_toggle() prefix fallback maps the live phases-2.7-2.14
categories (weather_warning, wildfire_incident, earthquake_event,
traffic_congestion, geomagnetic/rf_*, stream_*, ...) to their family, fixing the
v0.4 "category -> other" gap.
- config_loader.py: SECRET_FIELDS += notifications.toggles.*.smtp_password.
- _dataclass_to_dict now recurses dict-of-dataclasses, and the loader coerces the
toggles dict -> NotificationToggle on both the full-load and section-PUT paths
(so GUI save round-trips correctly).
- tests/test_notification_toggles.py (11): enabled/disabled, region filter
(empty+populated+regions-list), severity threshold, per-severity channel routing,
digest-skipped-live, quiet-hours-override immediate-only, category->family,
rules+toggles both fire. Full suite: 294 passed (283 + 11).
SECTION 2 -- FRONTEND
- Notifications.tsx: MasterToggles component above the rules section -- 8 family
cards (icon + enable toggle; collapsed summary 'OFF' or 'N regions, M channels at
<sev>+'; expanded: severity threshold, severity x channel checkbox matrix,
region list, quiet-hours-override toggle, per-channel config:
broadcast_channel/DM node IDs/recipients/SMTP host+port/webhook URL).
- Environment.tsx: CentralConnectionPanel above the family tabs (url, durable,
enabled) wired to environmental.central.
- npm run build clean (tsc strict); rebuilt static committed (index-CfYlhn4e.js).
SECTION 3 -- VERIFICATION
- py_compile + tsc strict clean; pytest 294 passed.
- Rebuilt prod: /notifications serves Master Toggles, /environment serves Central
Connection (strings confirmed in the served bundle); 8 adapters, pipeline
started, no tracebacks, healthy.
- GUI round-trip: enable weather toggle (min_severity=priority,
regions=[Magic Valley], severity_channels.priority=[mesh_broadcast]) -> PUT
{saved:true} -> notifications.yaml reflects it; env_feeds traffic.api_key stayed
${TOMTOM_API_KEY} (C.3.1 secret preservation holds). Restored to clean opt-in
baseline.
- Synthetic NWS weather_warning/priority/Magic Valley -> routes through the weather
toggle to mesh_broadcast; out-of-region and below-threshold events correctly
dropped.
DEFERRED (noted for a follow-up, not blocking Matt's morning config): Section 2B
rules-editor polish -- grouped-by-family category checkboxes, region_scope
multi-select in the rule editor (backend field + filtering ARE in), tooltips, and
the fire-count Active/No-activity badge -- were not built tonight to keep the build
shippable and verified; the Advanced Rules section is otherwise unchanged and
still functional.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Restructures the environmental config UI into the 7-family taxonomy on the
/environment page (Matt-approved Option C: unified families = config +
live status per adapter). The editable adapter config moves out of the
Config page's "Environmental" tab (now deprecated) onto /environment, where
each adapter sub-tab shows its AdapterPanel (on/off + feed_source + settings)
together with its live status (feed health + active events).
Frontend (dashboard-frontend/src):
- pages/Environment.tsx rewritten: 7 family tabs (Weather, Fire, RF
Propagation, Roads, Geohazards, Tracking, Mesh Health) -> per-family
adapter sub-tab strip -> AdapterPanel.
* AdapterPanel: header row = on/off Toggle + feed_source toggle
(native|central). When OFF, feed_source + all settings grey out
(disabled, not hidden).
* Native-only adapters (ducting, avalanche, roads511 -- no Central stream
per C.1's ADAPTER_SUBJECTS) show the feed_source toggle with 'central'
disabled + a 'Central not available for this adapter' tooltip/label.
* Missing-key adapters (firms, roads511) show an 'API key not configured
-- contact admin' notice; toggles still operate.
* Tracking = placeholder ('No adapters yet. ADS-B / AIS / satellite passes
are planned for v0.5.'). Mesh Health = no env adapters; a disabled
feed_source toggle with 'central' greyed for future migration.
* All existing per-adapter settings preserved verbatim (NWS zones/user_agent/
severity, ducting lat/lon, fires state, avalanche centers/season, USGS
sites, traffic corridors+key, roads511 base_url/key/endpoints/bbox, FIRMS
map_key/source/confidence/bbox). ALSO adds a usgs_quake panel
(tick/min_magnitude/region/bbox) -- usgs_quake (2.14) was never exposed in
the old GUI. feed_source field (C.1) now surfaced per adapter.
* Per-adapter live status: reuses /api/env/status feed health + /api/env/active
events (filtered by source; fires->nifc mapping). Refreshes every 30s.
- pages/Config.tsx: removed the now-duplicate 'Environmental' tab (SECTIONS
entry + render case + EnvironmentalSection function + unused Thermometer
import); exported the shared form primitives (Toggle, TextInput, NumberInput,
SelectInput, ListInput, NumberListInput, US_STATES) for reuse by Environment.tsx.
- Reuses the existing restart_required banner pattern.
- Rebuilt static: meshai/dashboard/static/{index.html, assets/index-9OZ6ZqzI.js,
index-B_J_Z7c8.css} (vite emptyOutDir replaced the old hashed bundle).
Rule 17 / no backend change: config is wired to the existing schema-driven
GET/PUT /api/config/environmental (the C.1 feed_source + central + usgs_quake
fields ride the generic dataclass coercion). No backend edited this phase.
Verification: (A) `npm run build` clean -- tsc strict + vite, only the
pre-existing >500kB single-chunk advisory (not introduced here). (B) static
committed; prod rebuilt picks it up. (C) GET / returns the new SPA shell
(index-9OZ6ZqzI.js); the bundle contains the new family strings (Geohazards,
RF Propagation, ADS-B, 'Central not available', 'API key not configured').
(D) GET /api/config/environmental returns all adapters with feed_source=native,
usgs_quake present, central{enabled:false} -- toggles bind to real data; all
native, nothing flipped. Rebuilt prod healthy.
*** BLOCKER FOUND (pre-existing, NOT introduced by C.2) -- flagged for C.2.1 ***
The save half of gate D fails: PUT /api/config/environmental returns
{"detail":"could not determine a constructor for the tag '!include' ..."}.
Root cause: the dashboard PUT handler (meshai/dashboard/api/config_routes.py)
calls meshai/config.py::save_config (monolithic; re-parses config.yaml with a
loader lacking the !include constructor) instead of the multi-file-aware
meshai/config_loader.py::save_section that exists for exactly the !include
layout. This breaks ALL GUI config saves in prod (every section, not just
environmental) and predates C.2 -- the old Config 'Environmental' tab had the
same broken save; C.1 did not touch save_config. The C.2 GET/render/toggle-bind
works; only persistence is blocked. Verified disk pristine (idempotent PUT
errored, wrote nothing; env_feeds.yaml md5 unchanged, restored from backup).
FIX (one line, but prod-wide blast radius -> wants its own phase + verification):
config_routes PUT should call config_loader.save_section(section, data, config_dir)
instead of config.save_config(...). Recommend C.2.1 backend fix before C.3.
C.3 (quake-to-central flip) should not proceed until C.2.1 unblocks GUI save,
since flipping feed_source from the GUI is the whole point.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
One-time renormalization pass under the .gitattributes added in the
previous commit. Every tracked text file now uses LF. No semantic
changes — verified via git diff --cached --ignore-all-space showing
zero real differences. Future diffs will only show real content
changes.
This commit will appear huge in git log --stat but represents zero
behavior change. Use git log --follow --ignore-all-space or
git blame -w when archaeologically tracing through this commit.
- Event feed shows event_type + area_desc instead of timestamp headline
- First sentence of description shown as hazard summary
- Local events (matching NWS zones) pinned to top with highlight
- Nearby events grouped below, slightly dimmed
- Dedup by event_id
Merged remote changes with local notification verification system:
- Kept local: channels.py, router.py, notification_routes.py, Notifications.tsx
(contains the new end-to-end verification system)
- Accepted remote: Config, Environment, Reference pages, new commands,
categories, summarizer, and other supporting files
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Channel connectivity test: SMTP, webhook, mesh with real errors
- Rule test shows live data from feeds, not canned examples
- Near-miss detection: shows events filtered by threshold
- Three send actions: current conditions, example alert, live alert
- Rule status indicators: last fired, data source health
- All errors show actual error messages
- Disabled feed detection with clear warnings
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Test always shows current data for the rule's feed categories
- RF rules show live SFI/Kp/R/S/G and ducting conditions
- Weather rules show active NWS alert count and headlines
- Fire rules show active fire/hotspot count
- Stream rules show current gauge readings
- Mesh rules show current health score and infra status
- Send Current Conditions delivers live snapshot through channel
- Send Test Alert delivers example through channel
- Send Live Alert available when real conditions match
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Tests check current conditions against rule categories/severity
- Shows actual alert messages that would fire right now
- Falls back to example messages from category registry if no matches
- Preview mode shows without sending, Send Test delivers with [TEST] prefix
- Mesh delivery applies real summarization so preview matches actual output
- Added test dialog UI showing conditions matched and preview messages
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Utilization pillar now reads firmware-reported channel_utilization
instead of estimating from packet counts with hardcoded 200ms/pkt
- Uses highest infra node value (busiest node = bottleneck)
- Falls back to packet count estimate only when telemetry unavailable
- Updated thresholds: 20/25/35/45% matching real Meshtastic behavior
- Per-region utilization from region nodes, not mesh-wide
- API response includes util_method, util_max_percent, util_node_count
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Reference page now explains HOW each health pillar is calculated:
- Infrastructure: router online ratio
- Utilization: airtime estimation from packet counts
- Coverage: gateway redundancy with single-gw penalties
- Behavior: flagged node thresholds
- Power: battery warning ratio
Includes actual formulas and special cases.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Replace fixed overlay with useRef-based click-outside detection
- Add X close button in top-right corner of popover
- Click ? to toggle (open if closed, close if open)
- Click anywhere outside popover to dismiss
- Remove fixed inset-0 overlay that was blocking page interaction
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add helper text and info (?) buttons to every field in Config.tsx
- Add section descriptions at the top of each config section
- Battery thresholds now show voltage equivalents (e.g., "30% ≈ 3.60V")
- NWS severity dropdown shows descriptions per option
- Alert rules grouped by category with full explanations
- Add InfoButton popover component for detailed field documentation
- Add info buttons to Environment.tsx RF propagation panels
- VOLTAGE_MAP and getVoltageApprox helper for Li-ion voltage lookup
Researched defaults and descriptions include:
- Li-ion voltage curve (4.20V=100%, 3.60V=30%, 3.50V=15%, 3.40V=7%)
- LoRa channel utilization (firmware throttles at 25%, issues at 50%)
- Packet flood detection (normal 1-5/min, suspicious >10/min)
- NWS severity levels with actionable descriptions
- Tropospheric ducting M-units/km refractivity gradients
- NOAA Space Weather R/S/G scales
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- SFI/Kp as prominent color-coded values with trend chart
- R/S/G scales as colored severity badges
- Tropospheric ducting condition with refractivity profile
- Environmental feeds replaced with scrolling live event timeline
- Unified activity log across all 9 feed adapters
- Source icons, severity badges, chronological order
- Real-time updates via WebSocket
- SWPC adapter stores Kp/SFI history for charting
- No wasted card space
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Self-contained rules replace abstract channels
- Inline delivery config (broadcast/DM/email/webhook or none)
- quiet_hours_enabled master toggle separate from start/end times
- delivery_type="" valid: rule matches but does not deliver
- Severity dropdown with plain-English descriptions
- Example messages per alert category
- Default baseline rules: Emergency Broadcast, Infrastructure Down, Fire Alert, Severe Weather
- Condition vs Schedule trigger types
- Test and preview buttons per rule
- stream_flood_warning renamed from flood_warning (distinct from packet_flood)
- Categories display with descriptions
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Each notification rule contains its own delivery config inline
- No more separate channels with abstract IDs to cross-reference
- Delivery type selector (Mesh Broadcast/DM/Email/Webhook) with
inline config fields per type
- Follows MeshMonitor trigger-action UX pattern
- Channel picker from radio for mesh broadcast
- Node picker for mesh DM
- Collapsed rule cards show readable one-line summary
- Trigger type: condition (alerts) or schedule (daily reports)
- Schedule triggers support daily, weekly, custom cron
- Message types: mesh health, RF propagation, alerts digest, custom
- Migrates old channels+rules config to new flat format on load
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add GET /api/channels endpoint for live radio channel data
- Create ChannelPicker component (single/multi-select from live channels)
- Create NodePicker component (searchable multi-select from mesh nodes)
- Replace manual inputs in Config with data-driven pickers
- Update Notifications to use pickers for mesh broadcast/DM
- Resolve node names in Alerts subscriptions display
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Create standalone Notifications.tsx page with full notification config UI
- Add /notifications route in App.tsx
- Add Notifications nav item in Layout.tsx sidebar (below Alerts, BellRing icon)
- Remove notifications section from Config.tsx (keep settings sections only)
- Channels, rules, quiet hours, and dedup all configurable on dedicated page
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Notifications tab in Config sidebar with Bell icon
- Channels section: add/edit/delete channels (mesh broadcast, DM, email, webhook)
- Test button sends test alert to channel
- Rules section: create rules with category checkboxes fetched from API
- Quiet hours configurable with start/end times
- Dedup window to prevent alert spam
- Full helper text and info buttons on every field
- Category list fetched from /api/notifications/categories, not hardcoded
- Added notifications and environmental to VALID_SECTIONS in config_routes.py
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add InfoButton component with click-to-toggle popover for field help
- Add SectionDescription component for section intro paragraphs
- Add AlertRuleToggle component with grouped threshold controls
- Add detailed info and helper text for every field in all sections
- Convert Commands section to toggleable command list with descriptions
- Add dropdowns for severity_min, fire state, connection type, LLM backend
- Add region management: Add/Delete buttons with confirmation
- Group alert rules by category: Infrastructure, Power, Utilization, Health
- Remove hardcoded placeholders and Idaho-specific text
- Fix config.py DashboardConfig dataclass decorator
- Fix main.py MessageRouter initialization
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Full Alerts page with active alerts, history table, subscriptions
- Active alert cards with severity styling and acknowledge button
- Alert history table with type/severity filtering and pagination
- Subscription viewer showing mesh subscriptions
- ToastProvider for app-wide toast notifications
- Toast notifications triggered on WebSocket alert_fired messages
- Auto-dismiss toasts after 8 seconds, click to navigate
- Page titles on all pages (Dashboard/Mesh/Environment/Config/Alerts)
- Improved alert_routes.py with proper pending alert handling
- Added AlertHistoryItem, Subscription types to api.ts
- Added fetchAlertHistory, fetchSubscriptions functions
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Implement FIRMSAdapter polling NASA FIRMS area API for satellite hotspots
- Cross-reference hotspots against NIFC perimeters to identify new ignitions
- Add !hotspots command with --new flag for filtering new ignitions only
- Add FIRMSConfig dataclass with map_key, source, bbox, day_range options
- Add /api/env/hotspots endpoint for dashboard integration
- Add Satellite Hotspots section to Environment.tsx with NEW badges
- Add FIRMS configuration section to Config.tsx with source/confidence options
- Update config.example.yaml with FIRMS configuration template
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- WFIGS ArcGIS fire perimeter polling with proximity alerts
- Avalanche.org advisory polling (seasonal, SNFAC)
- !fire and !avy commands
- Distance-based severity for fires near mesh infrastructure
- Dashboard environment page integration
- Alert engine fires on fires within 50km of mesh area
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Remove band_assessment and band_detail from SWPC adapter
- Remove all frequency-specific conclusions (906 MHz, 10m-20m, etc.)
- Store only raw indices: SFI, Kp, R/S/G scales, dM/dz gradients
- Let LLM interpret propagation data based on user's band of interest
- Add full Environment page with feed status, solar indices, and ducting data
- Update Dashboard RF Propagation card to show raw values only
- Update alert messages to be frequency-agnostic
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Tabbed config editor covering all 15 config sections
- Mesh sources: card-based list with add/edit/delete
- Mesh intelligence: region editor, critical nodes, alert rules
- Environmental feeds: per-feed toggle and config cards
- Save with validation, restart-required detection, discard changes
- Form components: text, number, toggle, select, textarea, list inputs
- Password fields with show/hide toggle
- Conditional field visibility based on enable toggles
- Replaces the 1434-line TUI configurator for daily use
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Added blur config for dimmed state (opacity 0.15 for nodes, 0.04 for edges)
- Added scale effect on node hover (1.1x)
- Explicit edgeSymbol: none to disable edge markers
- Only nodes are interactive: hover, click, tooltip
- Edges have no hover effect, no tooltip, no click handler
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Replaced React state-driven animation with ECharts graph rendering.
Previous approach re-rendered 263+ SVG nodes via setState in rAF loop,
causing browser lockup. New approach uses ECharts which handles force
layout and rendering natively at scale.
Changes:
- Switch from D3 force sim + React state to ECharts graph
- Remove particle animation (was fake random noise, not real packets)
- Filter out nodes with zero edges by default
- Add filter controls: Connected, Infra, All
- ECharts handles zoom/pan/drag natively (roam: true)
- Node selection dims unrelated nodes
- Force config matches Meshview: repulsion 200, edgeLength [80,120]
- Animation disabled for performance (animation: false)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Dynamic force parameters based on node/edge count and density
- Per-node degree-weighted link strength for balanced layouts
- Position clamping keeps nodes within viewport
- d3-zoom for pan/zoom (wheel, drag, double-click reset)
- Zoom control buttons (+, -, reset) in corner
- Drag handlers account for zoom transform
- Legends stay fixed outside transform group
- Scales gracefully from 63 to 200+ nodes
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Prevents "e.pillars is undefined" crash when health object
doesn't have pillars property (e.g., during initial load or
if API response is malformed).
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Vite + React 18 + TypeScript + Tailwind CSS
- Dashboard overview with health gauge, pillar bars, alerts
- WebSocket hook for real-time updates
- Layout with sidebar navigation and live indicator
- Placeholder pages for Mesh, Environment, Config, Alerts
- Dark theme ops center aesthetic with JetBrains Mono
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
