---
title: Fleet MagicDNS / systemd-resolved Migration
type: runbook
tags:
  - dns
aliases: []
related:
  - [[headscale-onboard-node]]
  - [[caddy]]
  - [[meshtastic-headscale-runbook]]
  - [[headscale-oidc-boot-order]]
  - [[lxc-service-migration]]
updated: 2026-07-13
---

# Fleet MagicDNS / systemd-resolved Migration

## Context / why

Fleet guests on Tailscale had a fragile [[dns]] setup. On LXC CTs without systemd-resolved, Tailscale owns `/etc/resolv.conf` and points **all** queries (public included) at the MagicDNS proxy `100.100.100.100`. If tailscaled loses its link, all DNS dies — including the lookup of the coordinator `vpn.echo6.co` needed to reconnect. That circular dependency is a hard brick.

This triggered during the June 2026 patch campaign: a CT went completely offline when tailscaled dropped and couldn't resolve its way back.

MagicDNS itself already works (Headscale `base_domain: echo6.mesh`, upstream 1.1.1.1) — the problem was fragility and lack of public-DNS fallback, not the feature itself.

**Goal of this migration:** bring every Tailscale guest to the robust split-DNS state the two VMs (recon-vm, arr) already had:

- systemd-resolved owns `/etc/resolv.conf` in stub mode
- Tailscale registers as a per-domain resolver for `echo6.mesh`
- A resolved global upstream (1.1.1.1/8.8.8.8) guarantees public DNS even when Tailscale is fully down
- Every guest uniform and documented

---

## Gold-standard target state

Verified on recon-vm (VM 1130). After migration, each guest must satisfy all of these:

| Check | Expected value |
|---|---|
| `systemctl is-active systemd-resolved` | `active` |
| `systemctl is-enabled systemd-resolved` | `enabled` |
| `/etc/resolv.conf` | symlink → `../run/systemd/resolve/stub-resolv.conf` |
| `resolvectl` Global `resolv.conf mode` | `stub` |
| `/etc/systemd/resolved.conf.d/upstream.conf` | `DNS=1.1.1.1 8.8.8.8` |
| `journalctl -u tailscaled \| grep "dns: using"` | `dns: using "systemd-resolved" mode` |
| `journalctl -u tailscaled \| grep "rc="` | `rc=resolved ... ret=systemd-resolved` |
| `resolvectl status tailscale0` DNS | `100.100.100.100` |
| `resolvectl status tailscale0` Domains | `echo6.mesh ~.` (accept-dns/CorpDNS on) |
| Docker CTs: `/etc/docker/daemon.json` | `"dns": ["1.1.1.1","8.8.8.8"]` |

Net result: `*.echo6.mesh` resolves via MagicDNS; public DNS is forwarded through Tailscale when it is up, and falls back to resolved's 1.1.1.1/8.8.8.8 when it is down.

---

## Per-guest pre-flight checks

Run these before starting. They determine which steps apply.

### 1. PVE nameserver entry

```bash
# On the PVE host:
grep -i nameserver /etc/pve/lxc/<ID>.conf
```

If a `nameserver:` line is present, clear it **before** anything else:

```bash
sed -i "/^nameserver:/d" /etc/pve/lxc/<ID>.conf
```

> **Note:** `pct set <ID> --delete nameserver` silently no-ops on PVE 9.x. Use the `sed` directly on the conf file.

### 2. Docker

```bash
pct exec <ID> -- bash -lc "which dockerd && cat /etc/docker/daemon.json 2>/dev/null || echo MISSING"
```

If `dockerd` is present and `/etc/docker/daemon.json` has no `dns` pin → apply **Step 0** first.

### 3. NordVPN

```bash
pct exec <ID> -- bash -lc "which nordvpn && nordvpn settings 2>/dev/null || echo NOT_PRESENT"
```

If nordvpn is present, its kill-switch can block tailscaled from reaching the coordinator after a restart. Allowlist edge2 first:

```bash
pct exec <ID> -- bash -lc "
nordvpn allowlist add subnet 184.174.35.153/32
nordvpn allowlist add port 443
"
```

### 4. Bucket assignment

```bash
pct exec <ID> -- bash -lc "systemctl is-active systemd-resolved"
```

- `active` → **Bucket R** (already installed; reconfigure only — skip Step 1)
- `inactive` / `not-found` → **Bucket I** (needs install — run Step 1)

---

## The recipe

Commands that run inside the CT are wrapped in `pct exec <ID> -- bash -lc '...'`; commands on the PVE host are noted explicitly.

### Step 0 — Docker DNS pin *(Docker CTs only)*

If `/etc/docker/daemon.json` does not exist:

```bash
pct exec <ID> -- bash -lc "
cat > /etc/docker/daemon.json <<'EOF'
{\"dns\": [\"1.1.1.1\", \"8.8.8.8\"]}
EOF
systemctl restart docker
"
```

If it already exists with other keys, merge the `dns` field manually — do not overwrite blindly.

After `systemctl restart docker`, running containers will briefly restart. Expected and safe.

> **Note on container DNS:** containers on bridge networks will show `127.0.0.11` in their own `/etc/resolv.conf`. That is Docker's embedded relay which forwards to the pinned upstream — expected behavior, not a stub.

---

### Step 1 — Install systemd-resolved *(Bucket I only)*

```bash
pct exec <ID> -- bash -lc "
apt-get update &&
DEBIAN_FRONTEND=noninteractive apt-get install -y systemd-resolved &&
systemctl enable --now systemd-resolved
"
```

This pulls 3 new packages plus a routine systemd point-release bump. It does not disrupt DNS — Tailscale still owns `/etc/resolv.conf` at this point.

---

### Step 2 — Resolved upstream drop-in

```bash
pct exec <ID> -- bash -lc "
mkdir -p /etc/systemd/resolved.conf.d
cat > /etc/systemd/resolved.conf.d/upstream.conf <<'EOF'
[Resolve]
DNS=1.1.1.1 8.8.8.8
EOF
systemctl restart systemd-resolved
"
```

---

### Step 3 — Guard #1: tailscaled ordering

This guard stops tailscaled racing systemd-resolved's D-Bus at boot. Without it, tailscaled starts before resolved is ready and falls back to "direct" mode — breaking the split-DNS config.

```bash
pct exec <ID> -- bash -lc "
mkdir -p /etc/systemd/system/tailscaled.service.d
cat > /etc/systemd/system/tailscaled.service.d/resolved-ordering.conf <<'EOF'
[Unit]
Wants=systemd-resolved.service
After=systemd-resolved.service

[Service]
ExecStartPre=/bin/bash -c \"c=0; while ! busctl status org.freedesktop.resolve1 >/dev/null 2>&1; do c=\$((c+1)); [ \$c -ge 30 ] && break; sleep 0.5; done; true\"
EOF
systemctl daemon-reload
"
```

---

### Step 4 — Guard #2: PVE resolv.conf overwrite protection

PVE rewrites `/etc/resolv.conf` from the host at `pct start` — and may mark it immutable with `chattr +i`. This service restores the stub symlink before any container [[services]] run.

```bash
pct exec <ID> -- bash -lc "
cat > /etc/systemd/system/fix-resolv-stub.service <<'EOF'
[Unit]
Description=Restore /etc/resolv.conf stub symlink (overwritten/immutable-flagged at container start)
DefaultDependencies=no
Before=systemd-resolved.service network-pre.target
After=local-fs-pre.target

[Service]
Type=oneshot
RemainAfterExit=yes
ExecStart=/bin/sh -c \"mkdir -p /run/systemd/resolve && if [ ! -L /etc/resolv.conf ]; then chattr -i /etc/resolv.conf 2>/dev/null; rm -f /etc/resolv.conf && ln -s /run/systemd/resolve/stub-resolv.conf /etc/resolv.conf; fi\"

[Install]
WantedBy=sysinit.target
EOF
systemctl enable fix-resolv-stub.service
"
```

> **Why both guards?**
> - Guard #1 (Step 3): tailscaled races resolved's D-Bus on boot → would silently pick "direct" mode. The `ExecStartPre` probe waits for D-Bus to be ready.
> - Guard #2 (Step 4): PVE restores its own static resolv.conf (possibly `chattr +i`) at every `pct start`, before systemd-resolved runs. Without this, the stub symlink is always gone on boot. Both were proven required on a clean guest.

---

### Step 5 — Clear PVE nameserver (host, if still present)

```bash
# On the PVE host:
sed -i "/^nameserver:/d" /etc/pve/lxc/<ID>.conf
```

Safe to re-run if already done in pre-flight.

---

### Step 6 — Live stub swap

Stop tailscaled **first** — while it is running it instantly rewrites `/etc/resolv.conf` the moment the symlink is removed.

```bash
pct exec <ID> -- bash -lc "
systemctl stop tailscaled
chattr -i /etc/resolv.conf 2>/dev/null
rm -f /etc/resolv.conf
ln -s /run/systemd/resolve/stub-resolv.conf /etc/resolv.conf
systemctl restart systemd-resolved
"
```

---

### Step 7 — Restart tailscaled and verify mode

```bash
pct exec <ID> -- bash -lc "systemctl restart tailscaled"
```

Wait ~8 seconds, then check:

```bash
pct exec <ID> -- bash -lc "
journalctl -b -u tailscaled | grep -E 'rc=|dns: using'
"
```

Expected output includes both:
- `dns: using "systemd-resolved" mode`
- `rc=resolved ... ret=systemd-resolved`

**Known pattern:** if `resolvectl status tailscale0` shows no DNS domain scopes after the first restart, restart tailscaled once more. The second restart reliably pushes the `echo6.mesh ~.` scope config. This was observed on all 3 baseline guests.

```bash
pct exec <ID> -- bash -lc "systemctl restart tailscaled && sleep 8 && resolvectl status tailscale0"
```

---

### Step 8 — Enable accept-dns

```bash
pct exec <ID> -- bash -lc "
tailscale set --accept-dns=true
"
```

Verify:

```bash
pct exec <ID> -- bash -lc "
resolvectl status tailscale0
"
```

Expected: `tailscale0` shows `DNS Servers: 100.100.100.100` and `Domains: echo6.mesh ~.`. This confirms accept-dns/CorpDNS is active. (Note: `tailscale status --json | jq .Self.CorpDNS` returns `null` in this Tailscale/Headscale build — use `resolvectl status tailscale0` as the authoritative check. Optionally: `tailscale debug prefs | grep -i corp`.)

---

## Validation

Run after every guest. All checks must pass before moving on.

### 1. Resolver state

```bash
pct exec <ID> -- bash -lc "
resolvectl status
"
```

Confirm:
- Global `resolv.conf mode: stub`
- `tailscale0` DNS: `100.100.100.100`
- `tailscale0` Domains: `echo6.mesh ~.`

### 2. Resolution checks

```bash
pct exec <ID> -- bash -lc "
getent hosts meshmonitor.echo6.mesh
getent hosts github.com
getent hosts mirror.gcr.io
"
```

- `meshmonitor.echo6.mesh` → a `100.64.x.x` tailnet IP (MagicDNS working)
- `github.com` and `mirror.gcr.io` → public IPs (public DNS working)

### 3. Kill-test — the point of this whole migration

```bash
# Bring Tailscale down
pct exec <ID> -- bash -lc "tailscale down"

# Public DNS must still resolve (resolved fallback)
pct exec <ID> -- bash -lc "getent hosts github.com"

# Coordinator must still resolve — no circular brick
pct exec <ID> -- bash -lc "getent hosts vpn.echo6.co"

# Bring Tailscale back
pct exec <ID> -- bash -lc "tailscale up"

# After ~8s, MagicDNS must work again
sleep 8
pct exec <ID> -- bash -lc "getent hosts meshmonitor.echo6.mesh"
```

All four must succeed.

### 4. App health check

Verify the guest's primary application is healthy (method is per-guest).

### 5. Docker CTs

```bash
pct exec <ID> -- bash -lc "
docker exec <container> getent hosts github.com
"
```

Must resolve. Proves the DNS pin insulates containers from any Tailscale-related resolver changes.

### 6. Reboot persistence (mandatory)

```bash
# From PVE host:
pct reboot <ID>
```

After ~85 seconds:

```bash
pct exec <ID> -- bash -lc "
ls -la /etc/resolv.conf
resolvectl status | head -20
journalctl -b -u tailscaled | grep -E 'rc=|dns: using'
getent hosts meshmonitor.echo6.mesh
getent hosts github.com
"
```

All must pass. This is the check the two boot-ordering guards exist to satisfy: stub symlink intact, `mode: stub`, tailscaled in `systemd-resolved` mode, both DNS paths working.

---

## Rollback

Per guest — returns to the known-good static state (public DNS works, no MagicDNS). No reboot required.

**On the PVE host:**

```bash
pct set <ID> --nameserver "1.1.1.1 8.8.8.8"
```

**Inside the CT:**

```bash
pct exec <ID> -- bash -lc "
chattr -i /etc/resolv.conf 2>/dev/null
rm -f /etc/resolv.conf
printf 'nameserver 1.1.1.1\nnameserver 8.8.8.8\n' > /etc/resolv.conf
tailscale set --accept-dns=false
systemctl restart tailscaled
"
```

To also disable the guards (optional):

```bash
pct exec <ID> -- bash -lc "
systemctl disable fix-resolv-stub.service
rm -f /etc/systemd/system/tailscaled.service.d/resolved-ordering.conf
systemctl daemon-reload
"
```

---

## How to use MagicDNS

Any tailnet node resolves at `<hostname>.echo6.mesh` → its `100.64.0.x` tailnet IP.

Examples:
- `meshmonitor.echo6.mesh`
- `recon-vm.echo6.mesh`
- `cortex.echo6.mesh`

List node names:

```bash
# On edge2 (CT 107, mesh-bridge):
headscale nodes list
```

Base domain `echo6.mesh` is set in Headscale config. Use these names instead of hardcoding tailnet IPs in service configs and cron jobs.

---

## Fleet rollout status

**Migration complete 2026-06-22 — all 19 Tailscale guests + 2 VMs on systemd-resolved split-DNS.**

Across all 19 guests the recipe held with no failures. The "two tailscaled restarts" pattern (Step 7) was sometimes but not always needed — Bucket I install-path guests often received the `echo6.mesh ~.` domain scope on the first restart. Both boot guards (resolved-ordering.conf + fix-resolv-stub.service) proved necessary and sufficient for reboot persistence across every guest tested.

### Completed — 2026-06-22

| CT | Host | Bucket | Docker | Notes |
|---|---|---|---|---|
| CT108 [[meshai]] | utility | R | yes | — |
| CT102 [[searxng]] | utility | I | yes | — |
| CT112 cobalt | utility | R | yes | No containers deployed; daemon.json DNS pin applied |
| CT100 meshmonitor | utility | I | yes | meshai (CT108) stayed healthy throughout; MagicDNS canary validated via media.echo6.mesh |
| CT104 [[central]] | utility | I | no | — |
| CT101 [[caddy]] | utility | I | no | — |
| CT107 mesh-bridge | utility | I | no | Dual-tailnet bridge (echo6 tailscale0 + IdahoMesh tailscale1); both daemons migrated |
| CT110 peertube | media | I | no | NordVPN allowlist applied |
| CT111 mcc | media | I | no | Caddy on :80; healthy before+after |
| CT103 [[argus]] | cloud | R | yes | daemon.json merged (had runtime keys, no dns pin); argus-app stack (grafana/postgres) healthy; pre-existing: argus-app compose lacks restart:always — needs manual `docker compose up -d` after reboot (not a DNS issue) |
| CT120 immich | cloud | R | yes | daemon.json pre-pinned; machine_learning unhealthy pre-existing (self-cleared after reboot) |
| CT121 nextcloud | cloud | R | yes | daemon.json created (missing); 12-container AIO stack (apache/app/db/redis/collabora/…) all healthy before+after; CorpDNS null (expected for this build) — validated via resolvectl tailscale0 echo6.mesh ~.; reboot-persistent |
| CT101 wordpress | edge2 | I | yes | — |
| CT100 pdm | edge2 | I | no | pdm-enterprise apt repo 401s without subscription — disable during install, restore after |
| CT102 vaultwarden | edge2 | I | no | — |
| CT103 forgejo | edge2 | I | no | — |
| CT104 livesync | edge2 | I | no | — |
| CT105 [[authentik]] | edge2 | I | yes | — |
| CT106 matrix | edge2 | I | no | — |

### Already compliant (gold-standard VMs)

| Guest | Notes |
|---|---|
| recon-vm (VM 1130) | Reference state; validated |
| arr (VM 105) | Compliant |

### Pending

_None — fleet migration complete._